Car Satellite Radio System User Manual

DSR-6400 Series 87
Fast Facts 1
The Fast Facts 1 screen displays general information relating to the basic functionality of the unit.
Field Name Definition
Unit Displays the 16-digit unit address on the screen.
VC# Displays the Virtual Channel number.
Firmware Displays the firmware version in the boot sector of ROM and the
application section.
VCT ID Displays the current VCT ID.
Encryption Displays if the current service is encrypted or not.
Service Displays the service number for the current program.
Auth State If the current service is encrypted, this field displays the current
authorization state of the IRD.
Eb/No Shows the Signal to Noise (Eb/No) of the signal.
Signal State Shows the received signal state. It can either be Locked or
Searching, depending on whether the IRD is locked to a signal,
or not.
Sat/Xpndr Displays the satellite name and transponder number. If the
satellite name is null, then the satellite number is used.
Unit = 225-03177-05987-128
Firmware = 000148 00017C
Encryption = N/A
VC # = 0132
VCT ID = 0002
Eb/No = -2.0
Sat/Xpndr = T6/7
Polarization = Horz
FEC Rate = 3/4
A B
C
D
E
G H
J
K
L
Service # = 00003
F
Fast Facts 1 (PRX)
Signal Quality = 58
Symbol Rate = 10.51 Msps
Frequency = 1310.00 MHz
Auth State = Undefined Service
Signal State = Searching
Virtual Network = 7
M
O
N
P
I
GigE IP = 000.000.000.000
Q
NOTE: The value after PR
designates the processor that is
currently specified within the
menu system. For example,
PR2 designates that Processor
2 is specified. To view Fast
Facts for another processor,
change any PR field within the
menu system to the desired
processor number. The (PRX)
designation does not appear on
a DSR-6401.
A
B
C
D
E
F
G
H
I
J