Car Satellite Radio System User Manual

Status4 Menu

This menu only applies to RF input. Press the



buttons until the STATUS4 menu appears. This

screen displays the satellite name and signal tuning characteristics.

Sat Field

This status-only field displays the satellite name from the downloaded network information.

Dashes (---) are displayed when no information is available.

Freq Field

This status-only field displays the downlink frequency of the L-band signal. This may be different

from the frequency that was initially set in the Manual Tune menu.

Symb Field

This status-only field displays the symbol rate (megasymbols per second) of the L-band signal.

Dashes (---) indicate that no information is available.

Code Field

This status-only field displays the code rate (Error Control Coding for Forward Error Correction)

of the L-band signal.

Format Field

This status-only field displays the format of the L-band signal. The field displays either Comb

(Combined) or Split. Dashes (---) are displayed when no information is available.

Status5 Menu

This menu only applies to RF input. Press the



buttons until the STATUS5 menu appears. This

screen displays the sync, Eb/No, and authorization state of the unit.

E --- 1430.00 11.71 5/6 Comb

STATUS4 Sat Freq Symb Code Format

E Tuning -2.0 Undefined Service

STATUS5 Sync Eb/No Authorize State