Car Satellite Radio System User Manual
3
60
GigE IP Address Menu
Default: 192.168.054.100
Use the following procedure to set and view the GigE IP output address for the right Ethernet port
on the back panel of the unit. Press the
buttons until the GigE IP Address menu appears. The
address is represented in the common dotted-decimal format. Contact the network administrator
for details about configuring the GigE port for operation on your local network.
Important: Do not configure the IP Address of the 10/100 and GigE to be on the same subnet.
Press the
4
button until the cursor is at the IP Address label, and press ENTER to move into the
field. Use the arrow buttons (
4
) to enter the desired address and then press ENTER to
confirm the selection and exit the field.
GigE Subnet Mask Menu
Default: 255.255.255.000
Use the following procedure to set and view the GigE Subnet Mask for the right Ethernet port on
the back panel of the unit. Press the
buttons until the GigE Subnet Mask menu appears. The
GigE subnet mask is represented in the common dotted-decimal format.
Contact the network administrator for details about configuring the GigE port for operation on
your local network.
Press the
4
button until the cursor is at the Subnet Mask label, and press ENTER to move into the
field. Use the arrow button (
4
) to enter the desired address and then press ENTER to
confirm the selection and exit the field.
GigE Default Gateway Menu
Default: 192.168.054.002
Use the following procedure to set and view the GigE Default Gateway address for the right
Ethernet port on the back panel of the unit. Press the
buttons until the GigE Default
Gateway Address menu appears. The GigE Default Gateway is an address that is represented in
the common dotted-decimal format. Contact the network administrator for details about
configuring the GigE port for operation on your local network.
PORT GigE IP Address
E 192.168.054.100
PORT GigE Subnet Mask
E 255.255.255.000
PORT GigE Default Gateway
E 192.168.054.002