Weather Radio User Manual

Status Display Menus

Status display menus provide information regarding the current status of the DSR-

6000. This menu lists important Satellite Multiplex Decrypter parameters. These

fields are not editable, and the displayed information is either (1) the result of changes

in an installation or channel selection menu, or (2) a parameter the DSR-6000 reports

as part of its operation.

Status1 Menu

Press the

buttons until the Status1 menu appears.

FrontPanel Field

This status-only field displays whether the user is able to control the Satellite

Multiplex Decrypter completely from the front panel or whether some front panel

functions are disabled.

Input Type Field

This status-only field displays the input connector on which the active signal is

received.

Status2 Menu

This menu does not appear if the Input field (described on page 15) is set to ASI In.

Press the

buttons until the STATUS2 menu appears. This screen displays the

source name, channel number, and the signal quality.

Source Field

This status-only field displays the source name, which was entered by the

programmer or network operator at the encoder/uplink to identify the source.

Dashes are displayed when no information is available.

E Local Control L-Band

STATUS1 FrontPanel Input Type

E --- ---- ---

STATUS2 Source Channel Quality