User guide

iControl

Release Notes

request an upgrade package (see "Contact Us", on page 69).

Upgrading from iControl 1.xx

Previous versions (1.xx) of iControl are not compatible with release version 2.00 (and later).

Configuration files cannot be reused. User-configured items such as iC Navigator aliases, error

log settings and proc amps must be regenerated (we recommend you record all values before

proceeding with an upgrade). Old iControl Web sites will be converted, but the links will need

to be reassigned.

Upgrading from 2.xx

In order to update your system from version 2.xx releases, you must obtain an upgrade

package from the Miranda Technical Support team (support@miranda.com). This package

consists of the files and instructions you will need, which may vary according to the system to

be upgraded.

When planning an upgrade, consider the following:

• If you are upgrading an existing Application Server, review "Hardware Requirements"

on page 1. Some version 3.X features (e.g. streaming and probes), if used, may require a

hardware upgrade.

• Check compatibility with other Miranda and 3rd party software components.

•Review "Configuration Guidelines" on page 8 to properly set up your installation.

• Check the hardware compatibility of Imaging or Densité cards with this release.

Upgrading from 3.xx

In order to update your system from an earlier version 3.xx release, you must obtain an

upgrade package from Miranda Technical Support (see "Contact Us", on page 69). This

package consists of the files and instructions you will need, which may vary according to the

system to be upgraded.

Upgrades from earlier to later versions of iControl version 3.xx are accomplished using the

iControl Maintenance Form, available via the Application Server’s Webmin utility.

Note: An upgrade from version 1.xx involves a platform change which requires re-

imaging the Application Server hard drive.