User guide

Release Notes
Densité Services
42
Densité Services
 [Ref. #ICONTROL-12724] HCO-3901: When the refresh rate of an HCO-3901 card is set to
10 seconds, after you power up the card, thumbnails do not display on the thumbnail
panel.
Workaround: Toggle the refresh rate to FAST and then back to 10 seconds.
 [Ref. #ICONTROL-12901] Lumo Controller Service: When attempting to rename the Lumo
controller service in iControl Navigator, the controller may disappear from iC Navigator’s
view.
Workaround: Restart iControl Navigator.
 [Ref. #ICONTROL-12902] Axino, Kaleido Solo-900/910: When attempting to rename either an
Axino service or Kaleido Solo-900/910 service in iControl Navigator, these services may
disappear from iC Navigator’s view.
Workaround: Restart iControl Navigator.
 [Ref. #ICONTROL-16023] XVP-3901: If the XVP-3901 card is logging loudness data and you
enable then disable loudness monitoring, the loudness logging activity may be
interrupted, that is, the log file will close while a new one is created. The overall effect is a
loss of logged loudness data.
•
[Ref. #29836] IRD-3811: If your video output is SD and your reference is HD, the audio may
not process correctly when either of the following conditions are true:
• You have analog audio synchronized on an SDI output.
• Your audio is de-embedded by a de-embedder with the same reference as the IRD
card
•
[Ref. #29503] If your Densité cards have firmware enabling support for fingerprint
configuration, the control panels for these cards within iControl will show fingerprint
controls, even if the version of iControl you are using does not support it. In this case, even
if there are incoming lipsync and reference signals, iControl is unable to detect, compare,
nor analyze them.
•
[Ref. #25584] HMP-1801: Profiles are not implemented yet on this control panel.
•
[Ref. # 23578] In iControl Navigator, after you disable audio in the player and then re-enable
it, or when you change the size parameter, the card no longer produces sound.
Workaround: Close then reopen the card’s control panel.
•
[Ref. #23034/24793] Streaming from Densité cards may stop if more than one iControl
Application Server (or a pre-version 3.41 iControl Solo client) are connected to the same
Densité frame.
Note: There is a new property, icontrol.densite.stealrawpipe, which, when added to
the property file
/usr/local/iControl/bin/conf/java_densite.properties as
icontrol.densite.stealrawpipe=true, forces the allocation of raw data to the
most recent iControl Application Server connecting to the frame. The default
behavior is to not steal the raw pipe.