User guide

iControl

Release Notes

• [Ref. #23857] iC Router Control now supports importing NVISION configuration data into

Router Manager Configurator.

iControl Integration with ScheduALL

• iControl version 4.30 introduces the ScheduALL connector GSM plug-in, in support of an

integration with the ScheduALL® Enterprise Resource Management (ERM) system

software. The plug-in acts as a liaison handling all communications between iControl and

ScheduALL. Using the plug-in, iControl can now access ScheduALL’s database of tasks

(known as bookings) and resources (devices), and users can schedule device actions in

iControl according to that schedule. All ScheduALL alarm providers can be found in the

GSM Alarm Browser at the following location:

iControlalarms|Healthmonitoring|ScheduALL

The following graphics show the ScheduALL plug-in as seen in the GSM Alarm Browser

(see Figure 2-3, on page 15, see Figure 2-4, on page 16, and see Figure 2-5, on page 16) as

well as the ScheduALL Plug-in Configuration window (see Figure 2-6, on page 17 and

see Figure 2-7, on page 17), and tables listing bookings data and device data (see Figure 2-

8, on page 17 and see Figure 2-9, on page 18).

Figure 2-3 Creating a ScheduALL® alarm provider plug-in in the GSM Alarm Browser