Instruction manual

3
32
Video Out Format Menu
The Video Out Format menu allows the user to configure the video format. Press
the

buttons until the Video Out Format menu appears (shown below). It has
two fields that allow modification of the output format.
Note: The receiver does not convert 525-line video to 625-line video or convert
625-line video to 525-line video.
• When the input to the uplink encoder is 525-line, the field here selects the
receiver output to be NTSC or PAL M, and the 625-line field has no impact.
• When the input to the uplink encoder is a 625-line, the field selects the type of
PAL the receiver outputs, and the NTSC or PAL M selection has no impact.
525 Lines Field Default: NTSC
Press the
4
button until the cursor is at the 525 Lines label, and press the ENTER
button to move into the field. Press the

buttons to display the desired options
of NTSC or PAL M and press the ENTER button to confirm the selection and exit
the field.
625 Lines Field Default: PAL D, G, B
Press the
4
button until the cursor is at the 625 Lines label, and press the ENTER
button to move into the field. Press the

buttons to display the options of PAL
D, G, B; PAL I; or PAL N. Press the ENTER button to confirm the selection and
exit the field.
E NTSC PAL D,G,B
VIDEO OUT FORMAT 525 Lines 625 Lines