Instruction manual

DSR-4550 13
Operating the DSR-4550
Navigating the Menus
Even though the keypad options shown on the LCD screen may change for each
menu and for each field, the control buttons basically do the same thing. The user
may want to practice on a screen to become familiar with how the buttons work.
Notice that:
• Pressing the

buttons while the cursor is blinking next to the menu name
(far left corner), causes the cursor to scroll to another menu.
• Pressing the ENTER button while the cursor is blinking next to the menu name
(far left corner) causes the cursor to scroll to the Main, top-level menu.
• Pressing the
4
buttons while in the top line of the menu causes the cursor to
move between field labels (or the menu name and a field label).
• Pressing the
4
button at the rightmost field label causes the cursor to wrap to
the left side of the screen (to the menu name). Likewise, pressing the

button
when the cursor is at the menu name causes the cursor to wrap to the rightmost
field label.
• When the cursor is blinking on a field label (top row), pressing the ENTER
button causes the cursor to move below the label and enter into the field so the
setting can be changed.
• When the cursor is below the label, the displayed directional controls in the left
corner show what buttons can be pressed to change the setting in that field.
Usually the

buttons are used to display the various options associated with
a particular field.
• Individual alphanumeric characters that are part of a string may be changed
when the

symbol is present in the field. For example, the letters used for
the abbreviation of the audio language (e.g., eng or spa) are an editable string of
characters that can be edited individually. To do this:
1. Use the
4
buttons to select the alphanumeric character to change.
2. While in the character position to be changed, press the

buttons to
scroll through the alphanumeric character.
3. When the desired character is displayed, use the
4
buttons to move to
the next character position.
4. Repeat this process for each applicable character to be changed and when
finished, press the ENTER button to record the character string.
• To confirm and accept any changes to a field and move back up to the label
line, press the ENTER button.