Stereo System User Manual

A - 306 DSP96002 USER’S MANUAL MOTOROLA
SUBC Subtract with Carry SUBC
Instruction Fields:
(u u)
Dddd
Dn.L n n n where nnn = 0-7
Ssss
Dn.L n n n where nnn = 0-7
Timing: 2 + mv oscillator clock cycles
Memory: 1 + mv program words
Operation:
D.L - S.L - C → D.L (parallel data bus move)
Assembler Syntax:
SUBC S,D
(move syntax - see the Move instruction de-
scription.)
Description:
Subtract the low portion of the specified source operand S from the low portion of the destination operand
D along with the C bit of the condition code register and store the result in the low portion of D. This in-
struction is useful in multiple precision integer arithmetic routines. Note that the higher precision long words
of the input variables must be moved to the low portion of the Dn.
Input Operand(s) Precision: 32-bit integer.
Output Operand Precision: 32-bit integer.
CCR Condition Codes:
C - Set if a borrow is generated from the MSB of the result. Cleared otherwise.
V - Set if result overflows. Cleared otherwise.
Z - Cleared if the result is not zero. Unchanged otherwise.
N - Set if result is negative. Cleared otherwise.
I - Not affected.
LR - Not affected.
–
R - Not affected.
A - Not affected.
ER Status Bits: Not affected.
IER Flags: Not affected.
Instruction Format: SUBC S,D (move syntax - see the Move instruction description.)
00 1sss uu10 1ddd
31 14 13 0
OPTIONAL EFFECTIVE ADDRESS EXTENSION OR IMMEDIATE LONG DATA
DATA BUS MOVE FIELD