Stereo System User Manual

A - 264 DSP96002 USER’S MANUAL MOTOROLA
MOVE(P) Move Peripheral Data MOVE(P)
Operation:
X:<pp> → D
S → X:<pp>
#xxxx → X:<pp>
Y:<pp> → D
S → Y:<pp>
#xxxx → Y:<pp>
X:<pp> → X:<ea>
X:<ea> → X:<pp>
X:<pp> → Y:<ea>
Y:<ea> → X:<pp>
Y:<pp> → X:<ea>
X:<ea> → Y:<pp>
Y:<pp> → Y:<ea>
Y:<ea> → Y:<pp>
X:<pp> → X:<Rn+xxxx>
X:<Rn+xxxx> → X:<pp>
X:<pp> → Y:<Rn+xxxx>
Y:<Rn+xxxx> → X:<pp>
Y:<pp> → X:<Rn+xxxx>
X:<Rn+xxxx> → Y:<pp>
Y:<pp> → Y:<Rn+xxxx>
Y:<Rn+xxxx> → Y:<pp>
X:<pp> → P:<ea>
P:<ea> → X:<pp>
Y:<pp> → P:<ea>
P:<ea> → Y:<pp>
Assembler Syntax:
MOVE(P) X: pp, D
MOVE(P) S,X: pp
MOVE(P) #Data,X: pp
MOVE(P) Y: pp, D
MOVE(P) S,Y: pp
MOVE(P) #Data,Y: pp
MOVE(P) X: pp, X: ea
MOVE(P) X: ea, X: pp
MOVE(P) X: pp, Y: ea
MOVE(P) Y: ea, X: pp
MOVE(P) Y: pp, X: ea
MOVE(P) X: ea, Y: pp
MOVE(P) Y: pp, Y: ea
MOVE(P) Y: ea, Y: pp
MOVE(P) X: pp, X:(Rn+displacement)
MOVE(P) X:(Rn+displacement),X: pp
MOVE(P) X: pp, Y:(Rn+displacement)
MOVE(P) Y:(Rn+displacement),X: pp
MOVE(P) Y: pp, X:(Rn+displacement)
MOVE(P) X:(Rn+displacement),Y: pp
MOVE(P) Y: pp, Y:(Rn+displacement)
MOVE(P) Y:(Rn+displacement),Y: pp
MOVE(P) X: pp, P: ea
MOVE(P) P: ea, X: pp
MOVE(P) Y: pp, P: ea
MOVE(P) P: ea, Y: pp
Description:
Move the word operand to or from the X and Y I/O peripherals. The 7-bit I/O Short Address is one extended
permitting access to the I/O peripheral addresses located in the highest 128 locations of the X and Y data
memories. All memory addressing modes may be used for the memory effective address. The Long Dis-
placement addressing mode may also be used.
If the system stack register SSH is specified as a source operand, the system stack pointer SP is postdec-
remented by 1 after SSH is read. If the system stack register SSH is specified as a destination operand,