Stereo System User Manual

A - 102 DSP96002 USER’S MANUAL MOTOROLA
"cc" may specify the following conditions:
Non-aware*
Mnemonic Condition Set UNCC
EQ - equal Z = 1 No
ERR - error UNCC v SNAN v OPERR v No
OVF v UNF v DZ = 1
GE - greater than or equal NAN v (N & ~Z) = 0 Yes
GL - greater or less than NAN v Z = 0 Yes
GLE - greater, less or equal NAN = 0 Yes
GT - greater than NAN v Z v N = 0 Yes
INF - infinity I = 1 Yes
LE - less than or equal NAN v ~(N v Z) = 0 Yes
LT - less than NAN v Z v ~N = 0 Yes
MI - minus N = 1 No
NE(Q) - not equal Z = 0 No
NGE - not(greater than or equal) NAN v (N & ~Z) = 1 Yes
NGL - not(greater or less than) NAN v Z = 1 Yes
NGLE - not(greater, less or equal)NAN = 1Yes
NGT - not greater than NAN v Z v N = 1 Yes
NINF - not infinity I = 0 Yes
NLE - not(less than or equal) NAN v ~(N v Z) = 1 Yes
NLT - not less than NAN v Z v ~N = 1 Yes
OR - ordered NAN = 0 No
PL - plus N = 0 No
UN - unordered NAN = 1 No
Note: The operands for the ERR condition are taken from the ER register.
* See description of UNcc bit in Section A.4.
CCR Condition Codes: Not affected.
ER Status Bits:
INX - Not affected.
DZ - Not affected.
UNF - Not affected.
OVF - Not affected.
OPERR- Not affected.
SNAN - Not affected.
NAN - Not affected.
UNCC -Set if NAN is set and a non-aware floating-point condition is tested ("cc" conditions
marked "YES" above). Not affected otherwise.
IER Flags:
SINX - Not affected.
SDZ - Not affected.
SUNF - Not affected.
SOVF - Not affected.
SIOP - Set if NAN is set and a non-aware floating-point condition is tested ("cc" conditions
marked "YES" above). Not affected otherwise.