User`s guide

Getting Started
Creating a Project
24
Targeting MC56F83xx/DSP5685x Controllers
b. Select (highlight) Simple C. (Figure 2.8 shows this selection.)
Figure 2.8 Simulator Simple C Selection
NOTE
You should select a simulator target if your system is not connected
to a development board. If you do have a development board, your
target selection must correspond to the board’s processor.
c. Click the OK button. A project window opens, listing the folders for project
NewProj1.mcp. Figure 2.9
shows this project window docked in the IDE
main window.
Figure 2.9 Project Window (docked)