User`s guide

Debugging for DSP56800E
EOnCE Debugger Features
209Targeting MC56F83xx/DSP5685x Controllers
Select this checkbox to capture addresses of interrupt vector fetches and target
addresses of RTI instructions.
–Subroutine
Select this checkbox to capture target addresses of JSR, BSR, and RTS
instructions.
– Forward branches and JCC Backward branches
Select this checkbox to capture target addresses of the following taken
instructions:
BCC forward branch
BRSET forward branch
BRCLR forward branch
JCC forward and backward branches
– Backward branches excluding JCC backward branches
Select this checkbox to capture target addresses of the following taken
instructions:
BCC backward branch
BRSET backward branch
BRCLR backward branch
• Set trigger(s)
Select this button to open the
Set Trigger panel (Figure 8.13). For more
information on using this panel, see “Set Trigger Panel.”
. The resulting trigger
halts trace buffer capture.
• Capture initially halted, started by trigger
When this option is checked, the trace buffer starts off halted.
• Buffer full action
This pull down list lets you select the resulting action caused by the trace buffer
filling.
Set Trigger Panel
The Set Trigger panel (Figure 8.13) lets you set triggers for all the EOnCE functions. It
can be accessed from the panels used to configure those functions. The options
available change depending on the function being configured.