User`s guide

Debugging for DSP56800E
EOnCE Debugger Features
205Targeting MC56F83xx/DSP5685x Controllers
Figure 8.9 Set Hardware Breakpoint Panel
The
Set Hardware BreakPoint panel options are:
• Set trigger
Select this button to open the
Set Trigger panel (Figure 8.13). For more information on
using this panel, see “Set Trigger Panel.”
•Action
This pull down list lets you select the resulting action caused by the trigger.
–Halt core
Stops the processor.
– Interrupt
Causes an interrupt and uses the vector for the EOnCE hardware breakpoint
(unit 0).
Special Counters
This feature lets you use the special counting function of the EOnCE unit.
To open the EOnCE Special Counter panel (Figure 8.10
):
1. From the menu bar, select DSP56800E > Special Counter.
This panel is non-modal and will update itself whenever the processor stops.