User`s guide

Debugging for DSP56800E
Command Converter Server
196
Targeting MC56F83xx/DSP5685x Controllers
Figure 8.5 New Connection Window
2. In the Name edit box, type in the connection name.
3. Check Use Remote CCS checkbox.
Select this checkbox to specify that the CodeWarrior IDE is connected to a
remote command converter server. Otherwise, the IDE starts the command
converter server locally
4. Enter the Server IP address or host machine name.
Use this text box to specify the IP address where the command converter server
resides when running the command converter server from a location on the
network.
5. Enter the Port # to which the command converter server listens or use the default
port, which is 41475.