User`s guide

Debugging for DSP56800E
Command Converter Server
194
Targeting MC56F83xx/DSP5685x Controllers
Changing the Command Converter Server
Protocol to PCI
To change the command converter server to a PCI Connection:
1. While the command converter server is running, right-click on the command
converter server icon shown in Figure 8.1
or double click on it.
2. From the menu shown in Figure 8.2
, select Show Console.
3. At the console command line in the
Metrowerks Command Converter Server
window shown in Figure 8.3
, type the following command:
delete all
4. Press
Enter.
5. Type the following command:
config cc pci
6. Press
Enter.
7. Type the following command to save the configuration:
config save
8. Press
Enter.
Setting Up a Remote Connection
A remote connection is a type of connection to use for debugging along with any
preferences that connection may need. To change the preferences for a remote
connection or to create a new remote connection:
1. On the main menu, select
Edit > Preferences.
The IDE Preferences Window appears.
2. Click Remote Connections in the left column.
The
Remote Connections panel shown in Figure 8.4 appears.