User`s guide

Processor Expert Interface
Processor Expert Tutorial
102
Targeting MC56F83xx/DSP5685x Controllers
d. Use this list box to select GPIOC0_SCLK1_TB0_PHASEA1. (Figure 5.20
depicts this selection.)
Figure 5.20 New Pin Association
e. In the project window’s Processor Expert page, select the bean name
GPIO_C1. The Bean Inspector information changes accordingly.
f. Use the Pin for I/O middle-column list box to select
GPIOC1_MOSI1_TB1_PHASEB1.
g. Repeat substeps e and f, for bean
GPIO_C2, to change its associated pin to
GPIOC2_MISO1_TB2_INDEX1.
h. Repeat substeps e and f, for bean
GPIO_C3, to change its associated pin to
GPIOC3_SSA_B_TB3_HOME1.
i. Repeat substeps e and f, for bean
GPIO_D6, to change its associated pin to
GPIOD6_TxD1.
j. Repeat substeps e and f, for bean
GPIO_D7, to change its associated pin to
GPIOD7_RxD1.
k. In the project window’s Processor Expert page, select the bean name
IRQA.
The Bean Inspector information changes accordingly.
l. Use the Pin middle-column list box to select IRQA_B.
m. Repeat substeps k and l, for bean
IRQB, to change its associated pin to
IRQB_B.
n. You may close the Bean Inspector window.