Operation Manual

42 Bluetooth® wireless
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Menu >
Settings > Wireless & networks
>
Bluetooth settings .
3 Touch
Bluetooth to turn on and scan. If Bluetooth
power is already on, touch
Scan for devices .
4 Touch a device to connect.
5 If necessary, touch
OK , or enter the device passkey
(like
0000 ) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Reconnect devices
To automatically reconnect your smartphone with a
paired device, simply turn on the device.
To manually reconnect your smartphone with a paired
device, touch the device name in the
Bluetooth devices
list.
Disconnect devices
To automatically disconnect your smartphone from a
paired device, simply turn off the device.
To manually disconnect your smartphone from a paired
device, touch the device name in the devices list, then
touch
OK .
Change device name
Touch Menu > Settings > Wireless & networks
>
Bluetooth settings > Device name . Enter a name and
touch
OK .