User`s manual

User’s Manual M9328MX1ADS - Rev 2
MOTOROLA Configuration and Operation 9
User’s Manual — M9328MX1ADS
Section 2 Configuration and Operation
2.1 Introduction
This section consists of configuration information, connection descriptions, and
other operational information that may be useful in your development activities.
2.2 Configuring Board Components
Table 2-1 is a summary of configuration settings; subsections 2.2.1 through
2.2.2 give additional information.
Table 2-1 Component Configuration Settings
Component Position Effect
System Power
Switch, SW2
Move this switch to the ON position to enable the power
source connected to P23 to power the system.
Factory setting is OFF.
System Reset Switch,
SW1
Push to reset the MX1ADS.
Peripheral Selection
Switch, S1
S1
Enables UART1 transceiver, UART2 transceiver,and buzzer.
Disables IrDA module.
Factory setting is shown.
Subsection 2.2.1 explains other settings for this switch.
SW2
ONOFF
BRD
EDGE
SW1
5
ON
4
8
S1
1
2
36
7