User`s guide

Using the Phone 21
3.17 Setting the area code
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE .
3. Press MENU and then enter the area code.
4. Press MENU to save.
3.18 Registration
Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use.
Additional handsets must be registered to the base before
you can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION .
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES or NO .
4. Select
YES then press MENU to enter the registration
procedure as follows:
1. Press and hold FIND for around 4 seconds on the base,
2. Place the unregistered cordless handset on the base
or charger.
3. A confirmation tone is generated if registration is
successful.
HANDSET X is displayed where X denotes the
number of handsets, and then the phone returns to idle.
To register an originally unregistered handset, follow steps 1
through 3 above.
3.19 Resetting all settings
1. Press MENU and then VOL+ or REDIAL/VOL- to select
RESET SETTINGS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS .
3. Press MENU and to select
YES . All personalized settings
will reset to default.
NOTE
All of your phonebook entries, calls list, and redial list, will
remained unchanged.
release once IN USE LED is flashing.