User guide

1 INTRODUCTION
3
Rear Panel
1 Cable In — Connects to cable signal from the service provider
2 Ext IR Input – Connects to a remote control receiver accessory cable
3 IEEE-1394 — Audio and video device connection
4 M-Card — Inserted M-Card
5 Serial — Data test connector (service personnel only)
6 S-Video — Connects to S-Video (SDTV) input of TV or VCR
7 Video Out — Composite Video (SDTV)
8 Video outputs / YPbPr — Component video output (HDTV)
9 Baseband Audio Out — L/R audio
10 Digital Audio (coaxial) — Provides Dolby
®
Digital 5.1 audio or PCM
output
11 Digital Audio (optical) — Provides Dolby
®
Digital 5.1 audio or PCM
output
12 HDMI
™
— High-Definition TV (HDTV) connector (Provides Dolby
®
Digital
Plus (7.1) audio
13 Ethernet* — Network connection
14 USB* 2.0 — High-Speed peripheral device connection
15 Power connector
* Availability of certain features is dependent upon application support.