User guide

I CYAN I MAGENTA I YELLOW I BLACK
GALLEY:
2
PASS
:
6
OP:
PR:
FILE:
20998-2-Eng-Booklet
BUILD DATE:
May 4-05
ITEM TYPE:
Booklet-28 Pages plus Cover
JOB #:
LIVE:
1/4" x 1/4"
BUILD OP:
SK
AD TYPE:
AD #:
TRIM:
6" x 8.5"
BLEED:
1/8"
LINE SCREEN:
150
REV DATE:
June 14-05
FONTS:
STORAGE: COLOUR:
21143 CMYK
ACCOUNT:
Cogeco
PRODUCTION:
THE STUDIO
33 YONGE STREET, 12TH FLOOR, TORONTO, ONTARIO M5E 1X6 TELEPHONE: [phone] FACSIMILE: [phone]
Karen Farnocchi
CREATIVE:
Digital Starter Kit
REV OP:
SF/KB
SD5CODT0905P
REMOVE GUIDE COLOUR AT FINAL PASS
Helvetica Neue Condensed, Berthold Akzidenz
Grotesk Family, Zaph Dingbats, Times
First things fi rst
1. Write down the Digital Registration Number, located on the side of the Digital
Cable Receiver packaging, in the appropriate space on page 7 of this booklet.
The number starts with GI or M, followed by letters and/or numbers.
2. Next, record the serial number of your Digital Receiver in the appropriate place
on page 7 of this booklet. This number can be found on the back of the receiver
and it starts with 0000.
3. You’ll need these numbers when you call to activate your receiver. It’s easier
to record them now before the receiver is all hooked up.
Connecting your Digital Receiver to your TV
1. Set your TV to channel 3.
2. If you don’t have enough
electrical outlets, use a power
bar that will always be on.
3. The following diagram
represents the basic setup.
Follow the instructions for the
basic wiring connections. Don’t
forget to read all the detailed
notes. Not all receiver models
will look alike, but the required
inputs and outputs are all
labelled the same way.
Setting Up Your Digital Receiver
S-VIDEO
CABLE IN
VIDEO
IN
RL
AUDIO OUT
RL
AUDIO IN
DIGITAL RECEIVER
TV
Cable in
Cable
Wall
Outlet
SWITCHED
105-125V
60HZ
4A MAX
500W MAX
HIGH
SPEED
OUT OF
BAND
IR
DATA
S-VIDEO
TV Pass Card
IN
AUX
AUDIO
RL
AUDIO OUT
TO
TV/VCR
RF
IN
VIDEO
32
20998-2-Eng-booklet.indd 2-320998-2-Eng-booklet.indd 2-3 7/5/05 3:37:32 PM7/5/05 3:37:32 PM