User manual

DCT6400 Phase III User Guide

Connecting an A/V Receiver, TV, and VCR

1 Connect an RF coaxial cable to the cable wall outlet and the

CABLE IN connector on the DCT6400.

2 Connect a stereo audio cable to the AUDIO OUT R and L connectors

on the DCT6400 and the

INPUT R and L connectors on the

A/V receiver.

3 Connect a video cable to the VIDEO OUT connector on the DCT6400

and the

CABLE/TV VIDEO connector on the A/V receiver.

4 Connect a stereo audio cable to the VCR AUDIO OUT R and L

connectors on the A/V receiver and the

INPUT AUDIO R and L

connectors on the stereo VCR.

5 Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L

connectors on the stereo VCR and the

VCR AUDIO IN R and L

connectors on the A/V receiver.

6 Connect a video cable to the INPUT VIDEO connector on the stereo

VCR and the

VIDEO VCR OUT connector on the A/V receiver.

7 Connect a video cable to the OUTPUT VIDEO connector on the stereo

VCR and the

VIDEO VCR IN connector on the A/V receiver.

8 Connect a video cable to the INPUT VIDEO connector on the stereo

TV and the

TV/MONITOR OUTPUT video connector on the A/V

receiver.

If you can:

• Use the

OPTICAL SPDIF or coaxial SPDIF outputs instead of the stereo

AUDIO R and L outputs. In most cases, S/PDIF offers better audio

quality, including support for Dolby 5.1 Surround Sound.

• Use the S-video connections instead of the standard RCA video

connections. In most cases, S-video offers better video quality.

This video connection method does not support HD video. For more

information, see “Connecting Your

DCT6400

to an HDTV – Video Only.”