Cable Box User Manual

Connecting Baseband with Dolby

Digital to a TV, VCR and A / V Receiver

1 Connect an RF cable between the cable wall outlet and the cable in

connector on the DCT2000.

2 Connect the RF coaxial cable, supplied with the DCT2000, between the

RF IN and TO RF IN connectors on the DCT2000.

3 Connect a stereo audio cable between the AUDIO OUT R and L

connectors on the DCT2000 and the CABLE / TV AUDIO R and L

connectors on the A / V receiver.

4 Connect a SPDIF cable between the SPDIF connector on the DCT2000

and the DIGITAL INPUT COAX connector on the A / V receiver.

5 Connect a stereo audio cable between the VCR AUDIO OUT R and L

connectors on the A / V receiver and the INPUT AUDIO R and L

connectors on the stereo VCR.

6 Connect a video cable between the VIDEO connector on the DCT2000

and the CABLE / TV VIDEO connector on the A / V receiver.

7 Connect a stereo audio cable between the OUTPUT AUDIO R and L

connectors on the stereo VCR and the AUDIO VCR IN R and L connectors

on the A / V receiver.

8 Connect a video cable between the INPUT VIDEO connector on the stereo

VCR and the VIDEO VCR OUT connector on the A / V receiver.

9 Connect a video cable between the OUTPUT VIDEO connector on the

stereo VCR and the VIDEO VCR IN connector on the A / V receiver.

10 Connect a video cable between the INPUT VIDEO connector on the stereo

TV and the TV / MONITOR OUTPUT VIDEO connector on the A / V

receiver.

Cable connections marked with an * are optional. These connections allow the

use of the DCT2000 and TV without powering-on the VCR and A/V Receiver.

The optional connections are:

• Connect a RF coaxial cable between the TO TV / VCR connector on the

DCT2000 and the CABLE / ANTENNA IN connector on the stereo VCR.

• Connect a RF coaxial cable between the To TV connector on the stereo

VCR and the CABLE / ANTENNA IN connector on the stereo TV.

With this configuration, you can record with the VCR and playback sound through

the Dolby

digital receiver.

You must connect the left / right baseband audio and SPDIF connections from

the DCT2000 to the A / V receiver when using the Dolby

Digital SPDIF output.