Installation manual
Table Of Contents
- CONTENTS
- 1 INTRODUCTION
- 2 OVERVIEW
- 3 INSTALLATION
- 4 DIAGNOSTICS
- Using the Diagnostics
- General Status
- Out Of Band (OOB) Status
- Agile OOB Tuner Hunting
- In Band Status
- Audio/Video Status
- Unit Address
- Separable Security
- Firmware Version
- Current Channel Status
- Renewable Security
- Upstream Modem
- App Code Modules
- Memory Configuration
- Interactive Status
- MAC Frequency Table
- Control Channels
- Message Types
- In-band Program Association Table (PAT)
- In-band Program Map Table (PMT)
- Task Status
- In-band Multicast Address Filter
- Connected Home Status
- Keyboard / LED
- 5 TROUBLESHOOTING
4 DIAGNOSTICS
34
MAC Frequency Table
The set-top uses a range of frequencies set by the host for upstream
communications. The MAC Frequency Table displays your frequency and signal
power.
Field Description
Frequency The frequency, in Hz, for an upstream channel
Power The power level, in dBmV, used on a particular upstream channel to send data to the RPD
Control Channels
This diagnostic lists channels, band types, PIDs, and counts.