Installation manual
Table Of Contents
- CONTENTS
- 1 INTRODUCTION
- 2 OVERVIEW
- 3 INSTALLATION
- 4 DIAGNOSTICS
- Using the Diagnostics
- General Status
- Out Of Band (OOB) Status
- Agile OOB Tuner Hunting
- In Band Status
- Audio/Video Status
- Unit Address
- Separable Security
- Firmware Version
- Current Channel Status
- Renewable Security
- Upstream Modem
- App Code Modules
- Memory Configuration
- Interactive Status
- MAC Frequency Table
- Control Channels
- Message Types
- In-band Program Association Table (PAT)
- In-band Program Map Table (PMT)
- Task Status
- In-band Multicast Address Filter
- Connected Home Status
- Keyboard / LED
- 5 TROUBLESHOOTING
4 DIAGNOSTICS
27
The Current Channel status fields are:
Field Description
Connected
State
A connect or disconnect message determines whether the set-top is CONNECTED or
DISCONNECTED.
Type Indicates whether the channel is analog or digital:
OSD Description
ANALOG Analog
DIGITAL Digital
aaa Displays the encryption mode for the channel on the OSD. For a digital channel, it can be:
ENC — encrypted
UNE — unencrypted
bb (Digital channels only) The current epoch authorization reason is displayed in the
hexadecimal format 0xbb on the OSD.
Status Indicates the status of the currently tuned channel:
OSD Description
INIT Initialized State
CONFI Configured
ACQUI Acquiring the program
AUTH Authorized for the program
Not A Not authorized for the program
Preview Indicates whether the program is in the free preview state:
OSD Description
YES The program is in the free preview state
NO The program is not in the free preview state
Purchasable Indicates whether the current program can be purchased for viewing:
OSD Description
YES Can be purchased
NO Cannot be purchased
Purchased Indicates whether the current or next program has been purchased:
OSD Description
YES Purchased
NO Not purchased
CH Indicates the channel currently tuned when the OSD appeared
Tuned
Frequency
The actual programmed tuner frequency (Carrier Definition Frequency + 1.75 MHz)
The EPOCH Number and Type, Authorization, Service Status, and ID are for
Motorola use only.