Installation manual
Table Of Contents
- CONTENTS
- 1 INTRODUCTION
- 2 OVERVIEW
- 3 INSTALLATION
- 4 DIAGNOSTICS
- Using the Diagnostics
- General Status
- Out Of Band (OOB) Status
- Agile OOB Tuner Hunting
- In Band Status
- Audio/Video Status
- Unit Address
- Separable Security
- Firmware Version
- Current Channel Status
- Renewable Security
- Upstream Modem
- App Code Modules
- Memory Configuration
- Interactive Status
- MAC Frequency Table
- Control Channels
- Message Types
- In-band Program Association Table (PAT)
- In-band Program Map Table (PMT)
- Task Status
- In-band Multicast Address Filter
- Connected Home Status
- Keyboard / LED
- 5 TROUBLESHOOTING
4 DIAGNOSTICS
22
OSD Description
N/A The audio mode is not applicable to the currently
tuned stream.
Mono The audio mode is monophonic.
Stereo The audio mode is stereo.
Surround The audio mode is surround sound.
AUDIO SPDIF Indicates SPDIF Mode as set by application software
OSD Description
N/A Audio SPDIF mode is not applicable
Dolby For digital channels, the possible Dolby
®
Digital modes are:
1+1 Left is channel 1, right is channel 2
1/0 Center
2/0 Left, right
2/1 Left, center, right
3/1 Left, right, surround
2/2 Left, right, left surround, right surround
3/2 Left, center, right, left surround, right surround
LFE 0 Low frequency effects (subwoofer) channel not available
LFE 1 Low frequency effects (subwoofer) channel available
VP Lock VP Lock indicates the Video Processor locked status
OSD
Display
Description
YES Video Processor is locked to the video stream
NO Video Processor is locked to the video stream
MPEG Method The MPEG Method selected
OSD
Display
Description
UNMUTED Is displayed if mute method is not selected
MUTE STILL Is displayed if the mute method includes stopping video and
presenting a still frame, similar to a pause function
MUTE
BLACK
Is displayed if mute method presents a black screen.
Subtitle Status The subtitle parameter indicates if subtitles are enabled and, if enabled, what
language is selected and if the subtitle is being rendered. The language is
displayed as the 3-character ISO639.2/B language code.
• Enabled is indicated with Yes or No.
• The language is displayed as the 3-character ISO639.2 language code.
• Enhanced mode is indicated with Yes or No.
• Rendered status is indicated with Yes or No.