Installation manual
Table Of Contents
- CONTENTS
- 1 INTRODUCTION
- 2 OVERVIEW
- 3 INSTALLATION
- 4 DIAGNOSTICS
- Using the Diagnostics
- General Status
- Out Of Band (OOB) Status
- Agile OOB Tuner Hunting
- In Band Status
- Audio/Video Status
- Unit Address
- Separable Security
- Firmware Version
- Current Channel Status
- Renewable Security
- Upstream Modem
- App Code Modules
- Memory Configuration
- Interactive Status
- MAC Frequency Table
- Control Channels
- Message Types
- In-band Program Association Table (PAT)
- In-band Program Map Table (PMT)
- Task Status
- In-band Multicast Address Filter
- Connected Home Status
- Keyboard / LED
- 5 TROUBLESHOOTING
4 DIAGNOSTICS
19
In-Band Status
This diagnostic displays the in-band status for the last attempted channel tune.
The In-Band Status fields are:
Field Description
Data Indicates whether data is being received on the in-band stream. The indicators cover
all packet processors regardless of the stream they are monitoring:
OSD Description
”*” In-band data received
blank No In-band data received
EMM Data Indicates whether data is being received on the EMM stream. The indicator is clear
when the diagnostic is started.