Installation manual
Table Of Contents
- CONTENTS
- 1 INTRODUCTION
- 2 OVERVIEW
- 3 INSTALLATION
- 4 DIAGNOSTICS
- Using the Diagnostics
- General Status
- Out Of Band (OOB) Status
- Agile OOB Tuner Hunting
- In Band Status
- Audio/Video Status
- Unit Address
- Separable Security
- Firmware Version
- Current Channel Status
- Renewable Security
- Upstream Modem
- App Code Modules
- Memory Configuration
- Interactive Status
- MAC Frequency Table
- Control Channels
- Message Types
- In-band Program Association Table (PAT)
- In-band Program Map Table (PMT)
- Task Status
- In-band Multicast Address Filter
- Connected Home Status
- Keyboard / LED
- 5 TROUBLESHOOTING
7
3 INSTALLATION
Before You Begin
Before you move or change components on the subscriber entertainment system:
• Review the installation instructions.
• Determine if you are connecting to a standard TV or a composite (baseband)
monitor.
• Verify that you have the necessary cables and other required items.
Video Connection Options
Use the following guidelines to determine the best video connection for the
subscriber’s home entertainment system. To determine the available video inputs on
the TV, check the manual supplied with the TV or the TV itself.
The DCH70 offers the following video outputs:
Video
(composite)
SDTV only Use the composite video (video) output (L and R).
RF
SDTV only If your TV only has a coaxial RF input, connect it to the DCH70 RF out
connector.