Installation manual

4 DIAGNOSTICS
41
The Code Modules fields are:
Field Description
Boot Code
The boot code version in ASCII format.
Version
The firmware version and build date in ASCII format.
Digital Secure
Processor
The digital secure processor version in ASCII format.
Analog
Secure
Processor
The analog secure processor version in ASCII format.
Downloadable
Object
Information
Table
Lists all objects loaded, or being loaded, onto the DCH6200, in ASCII format. The
information displayed for each object depends on the running environment. If a
download is not in progress, the front panel displays the current environment running
and version number as shown in Figure 4-9. On the front panel, “bPC” represents base
platform or Thin Client code.
Object
The object name.
Ver
The object version.
Status
The object status, updated on the OSD and LED every 5 seconds while you display the
diagnostic:
OSD Status Description
MEM ALLOC Allocated Memory for object is allocated
LOADING Loading Object is being loaded
STARTING Enabling Object is being started (the constructor
is running)
ENABLED Enabled Object is running
ENA–NOT RUN Enabled_Not_ Runnable Object is enabled, but cannot run
STOPPING Disabling Object is being stopped (the destructor
is running)
DISABLED Disabled Object has been disabled
DIS-NOT RUN Disabled_Not_ Runnable Object is disabled and cannot run
DELETING Deleting Object is being deleted
POSTPONED Postponed Object cannot run on the current
system; it will be enabled during the
next boot
CONNECTED Connect
Connected to download PID − awaiting
data
PEND CONNECT TryingToConnect Trying to connect
ID
The object identifier