Installation manual

4 DIAGNOSTICS
32
Separable Security
This diagnostic displays information on the inserted M-CARD and CableCARD Interface
with the DCH
.
Field Description
CARD Interface
CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate ‘Good’ if a Native/Legacy resource is
established between the host and card, ‘Error’ if an error has occurred when
establishing the Native/Legacy resource, or ‘Unsupported CARD’ if the
inserted CableCARD is not a Motorola M-CARD in M-Mode.
CableCARD ID
The unique identifier provided by the CableCARD.
Host ID
The unique identifier in the Host Device Certificate.
Data ID
A value generated by the CableCARD for the Pairing report.
Validation
• UKNOWN if a Validation message was not received by the
product.
• VALID or INVALID as set by the Host Validation Message
received from the headend.
• BINDING if the CableCARD is busy with the binding
authentication process.
• NOT BOUND if Card validation status in not bound for
CableCARD reasons.
• HOST CERTIFICATE INVALID if the status is not bound
because the Host Certificate was invalid.
• HOST SIGN FAILED if status is not bound because of
failure to verify Host’s SIGN.
• AUTH KEY FAILED if status in not bound because of
failure to match AuthKey from the Host Device.
• FAILED if binding failed for other reasons.
Pairing Rpt Method
Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or