DVR User Manual

2 OVERVIEW

Rear Panel

The rear panel contains an unswitched power outlet; connectors for video, audio, and RF

cabling; data output; and modem and data interface connectors. Some connectors are

not enabled and require the support of application software.

Figure 2-2 Rear panel

Table 2-2 Rear panel connections

1 Cable In — Connects to cable signal from your service provider

2 RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR

3 M-Card — Inserted M-Card

4 Serial — Service only

5-6 Digital Audio (S/PDIF) — Provides Dolby

Digital 5.1 audio or PCM output

7 S-Video — Connects to S-Video (SDTV) input of TV or VCR

8 Video/Audio—Composite Video (SDTV) /Audio L/R outputs / YPbPr—

Component video output (HDTV)

9 HDMI — High-Definition TV (HDTV) connector

10 eSATA* — External Serial ATA disk interface

11 USB* 2.0 — High-Speed peripheral device connection

12 Ethernet* — Network connection

13 IEEE-1394 — Audio and video device connection

14 Power cord connector

*The availability of certain features is dependent upon application support.

M-Card™

The M-Card is required to view cable television programs, previously recorded programs

on the DVR, or interactive on-demand programs. The M-Card should not be removed.