Car Satellite TV System User Manual

4 DIAGNOSTICS
43
AUDIO SPDIF
Indicates SPDIF Mode as set by application software.
OSD Display Description
N/A Audio SPDIF mode is not applicable
IEC958PCM PCM audio selected
Dolby For Dolby Selection, the following speaker selection is set:
1/0 right front or left front
2/0 right front and left front
3/0 right front and left front and center
2/1 right front and left front and (right rear or left rear)
3/1 right front and left front and center and (right rear or left rear)
2/2 right front and left front and right rear and left rear
3/2 right front and left front and center and right rear and left rear
LFE: Low
Frequency Effect
The LFE indicates if the nomenclature low frequency effects are available in the
Dolby audio stream as indicated if the ‘0.1’ is present in the Dolby 5.1 nomenclature
(for example, ‘Dolby 5.1 surround’). Valid values include:
OSD Display Description
0 LFE is not available
1 LFE is available (for example, ‘Dolby 5.1 surround’).
Muting State and
Method
The Audio and Video Mute Status indicates if the audio and/or video has been muted
by the software. The audio mute is either ‘On’ or ‘Off’. The Video Mute describes the
MPEG muting method selected by the software and indicates if the output video is in
the mute state by displaying ‘On’ or ‘Off,’ followed by the mute method. Methods
include:
OSD Display Description
UNMUTED Displayed if mute method is not selected
MUTE to STILL Displayed if the mute method includes stopping video and presenting a still frame,
similar to a pause function
MUTE to
BLACK
Displayed if mute method presents a black screen.
Captions
The captions mode displays captions present on the service. Note: The caption
options are set via the User Setting Menu, where the subscriber can enable closed
captions and select options.
1
st
Caption Row: Caption Detected:
OSD Display Description
708 EIA-708 captions detected
608 EIA-608 captions detected
608 and 708 Both EIA-608 and EIA-708 captions detected
None No Captions detected