Car Satellite TV System User Manual

4 DIAGNOSTICS
32
Separable Security
This diagnostic displays information on the inserted M-CARD and CableCARD Interface
with the DCH.
Field Description
CARD Interface
CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate ‘Good’ if no errors are detected, ‘Error’ if
there is an error establishing the CableCARD interface , or ‘Unsupported
CARD’ if the inserted CableCARD is not an M-CARD.
CableCARD ID
The unique identifier provided by the CableCARD.
Host ID
The unique identifier in the Host Device Certificate.
Data ID
A value generated by the CableCARD for the Pairing report.
Validation
• UKNOWN if a Validation message was not received by the product.
• VALID or INVALID as set by the Host Validation Message received
from the headend.
• BINDING if the CableCARD is busy with the binding authentication
process.
• NOT BOUND if Card validation status in not bound for CableCARD
reasons.
• HOST CERTIFICATE INVALID if the status is not bound because
the Host Certificate was invalid.
• HOST SIGN FAILED if status is not bound because of failure to
verify Host’s SIGN.
• AUTH KEY FAILED if status in not bound because of failure to
match AuthKey from the Host Device.
• FAILED if binding failed for other reasons.
Pairing Rpt Method
Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or
set to ‘Unknown’ if the headend message was not received.
MSO Phone Number
MSO Phone Number as configured at the headend.
CableCARD