Car Satellite TV System User Manual

3 INSTALLATION
11
• Otherwise, use the baseband left and right audio out outputs.
3. Locate the cabling diagram(s) that best match the subscriber’s configuration.
4. Connect the audio and video cables in a manner matching that diagram.
5. Determine if you are connecting to a data device (see
Data Device Connections in
this section). For installation details, refer to the instructions included with the data
device.
6. Connect the cable terminal to the coaxial cable wall outlet.
7. Perform the operational check for the remote control.
8. Optimize the high-definition settings. See
Optimizing the High-Definition Settings in
this section.