Installation manual

4 DIAGNOSTICS
30
Upstream Modem
This diagnostic displays the upstream status and operating parameters.
The RF Modem fields are:
Field Description
Status Indicates the transmitter status with the following variables
OSD Description
- Idle
t Transmitting
Frequency The transmitting frequency
Level The approximate power value of the STARVUE II transmitter in dBmV. The
difference between the power value on the diagnostic screen and the actual power
of the STARVUE II module may be +/- 5 dBmV.
IPPV Indicates the Interactive Pay-Per-View status with the following variables
OSD Description
Enabled IPPV Enabled
Unsent -
##
The set-top contains unsent IPPV transactions. The variable -## is the
number of unsent transactions.
Disabled IPPV disabled
Last Poll Req. Indicates the sequence number of the last poll request received by the set-top. The
time stamp of the last poll request is also displayed.
• If the set-top has received no poll request, the sequence number and time
stamp fields display N/A
• If the set-top has received a poll request but its system time has not yet
been initialized, the time stamp field displays NOT AVAILABLE.