Installation manual

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD

Interface with the DCH

Field Description

CARD Interface CableCARD Interface is a status indication of the interface between the Host

and CableCARD. It will indicate ‘Good’ if a Native/Legacy resource is

established between the host and card, ‘Error’ if an error has occurred when

establishing the Native/Legacy resource, or ‘Unsupported CARD’ if the

inserted CableCARD is not a Motorola M-CARD in M-Mode.

CableCARD ID The unique identifier provided by the CableCARD.

Host ID The unique identifier in the Host Device Certificate.

Data ID A value generated by the CableCARD for the Pairing report.

Validation

• UKNOWN if a Validation message was not received by the product.

• VALID or INVALID as set by the Host Validation Message received

from the headend.

• BINDING if the CableCARD is busy with the binding authentication

process.

• NOT BOUND if Card validation status in not bound for CableCARD

reasons.

• HOST CERTIFICATE INVALID if the status is not bound because the

Host Certificate was invalid.

• HOST SIGN FAILED if status is not bound because of failure to verify

Host’s SIGN.

• AUTH KEY FAILED if status in not bound because of failure to match

AuthKey from the Host Device.

• FAILED if binding failed for other reasons.

Pairing Rpt Method Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or