Installation manual

4 DIAGNOSTICS
24
The Unit Address fields are:
Field Description
Unit Address A unique decimal number that indicates the unit address or physical address (13 address
digits and three check digits).
Network
Address
The network address in decimal format (13 address digits and three check digits)
TVPC The TV Passcard Address in decimal format (13 address digits and three check digits)
CableCARD
Inserted
YES — CableCARD is inserted
NO — CableCARD is not inserted
Multicast 16
Address For
The Multicast 16 address numbers change to display the values for each data stream in
TCP/IP decimal byte form. The valid stream types are:
Net — Network
EMM — EMM
SCC — SCC_ECM
DWLD — Download
DATA — Data
POLL — Polling packet identifier (PID)
Seed Health This value represents the health of the set-top and should be 0xFF. If it is not 0xFF, see
the “Troubleshooting” section for more information.
Serial
Number
The Host Serial Number is displayed on the Unit Address diagnostic screen.
MAC
Addresses
The USB and DCH100 MAC addresses are stored in protected flash and displayed in
hexadecimal.