Manualshelf

Specifications

ManualsBrandsMotorola ManualsAdapterDC600
21222324252627282930
DC600 Portal Integrator Guide2-6
Mounting the DC600 to the Floor
The DC600 includes a base plate with six holes for bolting the DC600 to the floor (four holes for the Slim Single model).
After selecting a location for the DC600, drill bolt holes into the floor that align with the holes in the base plate. Insert six
(or four for the Slim Single model) 0.5 in. (1.27 cm) diameter ground fastening bolts through the base plate and into the
bolt holes to secure the DC600 to the floor. See Base Plate Mounting Dimensions - Single/Dual Model on page A-4.
For the Slim Single model, in addition to securing the DC600 to the floor, also use the appropriate wall fasteners to secure
the DC600 to the wall.
Installing the Floor Guard (Optional)
The DC600 Floor Guard QRG, P/N 72-75043-xx provides printed a full size mounting template (in the box to provide for accurate
positioning of the DC600 Floor Guard.
To install the optional floor guard:
1. Refer to Installation Configurations on page 2-3 for information on DC600 configuration and location options.
2. Position the DC600 Mounting Template under the DC600 and line up the DC600 mounting holes with the mounting holes on
the mounting template. The mounting template shows the position of the Floor Guard two right hand mounting holes.
3. Use the mounting template to locate the DC600 Floor Guard directly over the mounting template locating holes.
4. Use the Floor Guard to mark the mounting hole locations on the floor
5. Remove the DC600 Floor Guard and prepare the floor for mounting as applicable for the floor material.
6. Replace the DC600 Floor Guard and attach with fasteners appropriate for the floor material.
To install the floor guard, drill four bolt holes into the concrete floor that align with the four tabs in the floor guard. Insert four standard
0.5 in. (1.27 cm) diameter fastening bolts through the floor guard tabs and into the bolt holes to secure to the floor. See Base Plate
and Floor Guard Mounting Dimensions - Single/Dual Model on page A-5.
Figure 2-5. Floor Guard