User guide
Table Of Contents
- 1. Getting started
- 2. Getting to know your phone
- 3. Using the phone
- 4. Phonebook
- 4.1 View and dial phonebook entries
- 4.2 Store an entry
- 4.3 Entering names
- 4.4 Character map
- 4.5 Enter a pause
- 4.6 View an entry
- 4.7 Edit an entry
- 4.8 Delete an entry
- 4.9 Delete all entries
- 4.10 Copy phonebook to another handset
- 4.11 One touch keys
- 4.12 Dial a one touch number
- 4.13 Store a phonebook entry as a one touch number
- 4.14 Delete a one touch number
- 5. Caller display and Calls list
- 6. Clock & Alarm
- 7. Personal settings
- 8. Advanced settings
- 9. Using your Answer machine
- 10. Help
- 11. General information
- 12. Wall mounting
Getting started 9
The charge capacity of rechargeable batteries will reduce
with time as they wear out, giving the handset less talk/
standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent
charging time is about 6–8 hours a day. Batteries and
handset may become warm during charging. This is normal.
Setting up your D1010
Date and time
Providing you have subscribed to your network’s Caller
Display service, the date and time is set automatically for all
handsets every time a call is received.
The date and time is recorded with each answer machine
message you receive.
If you do not have a Caller Display service you can set the
date and time manually.
Set date and time manually
1.
Press m and scroll d to
CLOCK/ALARM
. Press m.
Display shows
DATE & TIME
, then press m.
2.
Enter the date using the format
DD/MM
e.g.
04/ 08
for 4th
August.
3.
Press m and enter the time using the 24 hour format
HH:MM
, e.g. 14:45 for 2:45pm.
4.
Press m to confirm or > to return to standby.
YOUR D1010 IS NOW READY FOR USE.