User guide
Table Of Contents
- 1. Getting started
- 2. Getting to know your phone
- 3. Using the phone
- 4. Phonebook
- 4.1 View and dial phonebook entries
- 4.2 Store an entry
- 4.3 Entering names
- 4.4 Character map
- 4.5 Enter a pause
- 4.6 View an entry
- 4.7 Edit an entry
- 4.8 Delete an entry
- 4.9 Delete all entries
- 4.10 Copy phonebook to another handset
- 4.11 One touch keys
- 4.12 Dial a one touch number
- 4.13 Store a phonebook entry as a one touch number
- 4.14 Delete a one touch number
- 5. Caller display and Calls list
- 6. Clock & Alarm
- 7. Personal settings
- 8. Advanced settings
- 9. Using your Answer machine
- 10. Help
- 11. General information
- 12. Wall mounting
Help 41
4.
Press m, the handset will start the new message
playback. Once all messages are played, the handset
will return to standby.
NOTE
During message playback, press
> anytime to return to
standby.
9.11 Memory full
The memory is full if there is less than 15 seconds of
recording time left or if the maximum total of 59 messages
has been reached.
When the memory becomes full:
• The LED will flash quickly.
• flashes quickly on the handset display.
• The machine will automatically switch to Answer Only
mode.
If the memory becomes full while a caller is leaving a
message, they will hear a beep and the call is ended.
10. Help
Charging
The icon is not scrolling when the handset is placed
on the base
• Bad battery contact – move the handset slightly
• Dirty contact – Clean the battery contact with a cloth
moistened with alcohol
• Battery is full – no need to charge
Calls
No dialling tone
• No power – check the connections. Reset the phone:
unplug and plug back in the mains
• Batteries are empty – charge the batteries for at least 24
hours
• You are too far from the base – move closer to the base
• Wrong line cable – use the line cable provided
• Line adaptor (when needed) is not connected to the line cord
– connect the line adaptor (when needed) to the line cord
Poor audio quality
The base is too close to electrical appliances, reinforced
concrete walls or metal doorframes – move the base at least
one metre away from any electrical appliances