User guide

40 Using your Answer machine
9.8.1 Remote Access on/off
1. Press m, scroll d to ANSW MACHINE and press m.
2. Scroll d to ANSW SETTINGS and press m.
3. Scroll d to REMOTE ACC and press m.
4. Scroll u or d to select ACTIVATED or DEACTIVATED .
5. Press m to confirm.
9.9 Call screening
Use your handset or base speaker to hear a caller leaving a
message. You can then choose to ignore the caller or pick
up the call.
The default settings are:
• Handset call screening: Off
• Base call screening: On.
At the handset:
1. If you want to interrupt and take the call press < or
v
At the base:
1. When a caller is leaving a message, press + or - to
adjust the volume to listen to your caller.
2. To interrupt and take the call on the handset, press <
or
v.
9.9.1 Switch handset call screening on/off
1. Press m, scroll u or d to ANSW MACHINE and press
m.
2. Scroll d to ANSW SETTINGS and press m.
3. Scroll to HS SCREENING and press m.
4. Scroll u or d to select ON or OFF .
5. Press m to confirm.
9.9.2 Switch base station call screening on/off
1. Press m, scroll d to ANSW MACHINE and press m.
2. Scroll d to ANSW SETTINGS and press m.
3. Scroll d to BS SCREENING and press m.
4. Press u or d to select ON or OFF .
5. Press m to confirm.
9.10 Access answer machine menu via
the Calls list
When the is flashing to indicate new messages you can
see caller details via
u or press d again to go to ANSW
MACHINE
to play new messages.
1. Press u, CALL LIST is displayed.
2. Press d, ANSW MACHINE is displayed.
3. Press m, PLAY is displayed.