User guide

Using the phone 17
3.3 Intercom
This feature is only available when there are at least 2
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use
the conference option.
3.3.1 Call another handset
1. Press I.
• If you have two handsets, the other handset is called
automatically.
• If more than two handsets are registered to the base,
their numbers are displayed, e.g.
2345* . Enter the number
of the handset you want to call or press
* to ring all
handsets.
2. Press > to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this
function may not be available.
3.3.2 Transfer an external call to another handset
1. During an external call, press I.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or
press
* to ring all handsets.
- If there are only two handsets, the other handset is
called automatically.
3. When the other handset answers, announce the caller
then press
> to transfer the call. If the other handset
does not answer, press
I to talk to your caller again.
3.3.3 Three-party conference call
1. During an external call, press I.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or
press
* to ring all handsets.
- If there are only two handsets, the other handset is
called automatically.
3. When the other handset answers, announce the call
then press and hold
I to connect both calls. If the
other handset does not answer, press
I to talk to
your caller again.
4. Press > to hang up.
3.4 Voicemail
If you have subscribed to your network’s voicemail service (if
available), your D1010 displays when you have a new
message. Depending on your country and network services,
the voicemail number may be pre-stored in your handset for
one touch dialling using the
1 button.