Answering Machine User Manual

20 Personal settings
7. Personal settings
Handset tones
WARNING
When the phone is ringing, avoid holding the earpiece too close to your
ear as it may damage your hearing.
Ring volume
Choose from: Ringer Off, Low, Medium, High, Boost and Progressive
(increasing ring volume).
NOTE
The default setting is High.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m.
3. RING VOLUME is displayed. Press m.
4. Scroll u or d to adjust the ringer volume level.
5. Press m to save the settings.
6. Press > to return to standby.
Ring melody
Choose from 10 ringer melodies.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to RING MELODY .
Press
m.
3. Press u or d to select the ringtone.
- A sample of the ringtone is played.
4. Press m to confirm.
5. Press > to return to standby.
Group melody
To benefit from this feature, you must subscribe to the Caller Line
ldentification service.This menu enables you to select and set the
melodies to be played when there is an external incoming call from a
contact whose name is stored in your phonebook and is part of a group.
You can associate 1 ring melody to each group. There are three
phonebook groups (Group A, B, C) available for you to organize your
contacts. Each group can be assigned a unique melody.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to GROUP MELODY .
Press
m.
3. Scroll u or d to select: GROUP A , B or C , then press m.
4. Press u or d to select the ringtone you want for the group and press
m.
5. Press > to return to standby.
Key tones on/off
When you press a key on the handset you hear a beep. You can switch
these beeps on or off.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to KEY TONE .
Press
m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
First ring
Your D1011 will automatically detect the Caller identification
(Subscription dependent). If you do not wish to hear the ring before the
caller identification is displayed you can manually set FIRST RING to
OFF. The default setting is ON.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to FIRST RING .
Press
m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
Handset name
Personalise your handset, with a name or location for example Peter or
Bedroom. Maximum 10 characters.
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to HANDSET NAME and press m. The current name is
displayed.
3. Press e to delete the current name.