MTM5400 TETRA Mobile Terminal Installation Manual American Communication Systems When printed by Motorola Discover the Power of Communications ™ TO ORDER – VISIT http://www.ameradio.
COPYRIGHT MTM5400 Mobile Terminal Installation Manual 3 COPYRIGHT Copyrights © 2010 by Motorola Inc. All rights reserved. No part of this manual may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Inc.
MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK
Product Safety and RF Exposure MTM5400 Mobile Terminal Installation Manual 5 IMPORTANT SAFETY INFORMATION Icon Conventions The signal word Warning with the associated safety icon implies information that, if disregarded, could result in death or serious injury, or serious product damage. The signal word Caution with the associated safety icon implies information that, if disregarded, may result in minor or moderate injury, or serious product damage.
MTM5400 Mobile Terminal Installation Manual Product Safety and RF Exposure ADDITIONAL IMPORTANT INFORMATION FOR SERVICING AND INSTALLING THE TERMINAL Only specialized workshops should be contacted for installation, maintenance and repair work. This unit is equipped with protection fuses in the Power and Ignition Sense Cable. Replace these fuses only with the original ratings! Failure to use correct manufacturer-approved parts may result in physical damage to this unit.
DOCUMENT HISTORY MTM5400 Mobile Terminal Installation Manual 7 DOCUMENT HISTORY The following major changes have been implemented in this manual since the previous edition: Edition Description Date 68015000181-A Initial edition Dec 2010 68015000181-B Toroid updates Dec 2010
MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK
CONTENTS MTM5400 Mobile Terminal Installation Manual 9 CONTENTS COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Computer Software Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MTM5400 Mobile Terminal Installation Manual CONTENTS Model Specifications* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Model Descriptions** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Accessories-to-Model Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS MTM5400 Mobile Terminal Installation Manual 11 Connection Plan for the Junction Box Accessory Terminal . . . . . . . . . . . . . . . . . . . . . 54 Connection Plan for Accessory Connector Kit (HLN9457) . . . . . . . . . . . . . . . . . . . . . 56 Connectors and Pin Assignment of the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Transceiver Rear Side - Pin Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Accessory Connection Plan . . . .
MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK
SCOPE MTM5400 Mobile Terminal Installation Manual 13 SCOPE Scope of This Manual This manual is intended for use by service technicians familiar with similar types of equipment. It contains information required for the installation of the equipment described and is current as of the printing date. Changes which occur after printing date may be incorporated by a complete Manual revision or alternatively as additions. The mobile terminal has to be installed by trained service personnel only.
MTM5400 Mobile Terminal Installation Manual MTM5400 Manuals and User Guides Installation Instructions 68015000181 MTM5400 Installation Manual (English) 68015000603 MTM5400 Installation Manual (English/German) Service Manual 68015000183 MTM5400 / MTM800 FuG Basic Service Manual EMEA (English) 68015000587 MTM5400 Basic Service Manual APAC (English) Quick Start Guides 68015000289 68015000290 68015000291 68015000292 68015000293 68015000294 68015000295 68015000296 68015000297 68015000298 68015000288 6801500
SCOPE MTM5400 Mobile Terminal Installation Manual 15 Warranty and Service Support Motorola offers long term support for its products. This support includes full exchange and/or repair of the product during the warranty period, and service/ repair or spare parts support out of warranty. Prior to shipping any terminal back to the appropriate Motorola warranty depot, please contact Customer Resources or your Motorola dealer, distributor or reseller.
MTM5400 Mobile Terminal Installation Manual SCOPE Service Information Europe, Middle East and Africa Region EMEA Systems Support Centre (ESSC) The EMEA Systems Support Centre provides a remote Technical Support Service to help customers resolve technical issues and quickly restore networks and systems. This team of highly skilled professionals is available to customers with current service agreements in place that include the Technical Support Service.
SCOPE MTM5400 Mobile Terminal Installation Manual 17 Motorola GmbH, European Systems Component Centre, Am Borsigturm 130, 13507 Berlin, Germany Contact details: Email: ESCC.admin@motorolasolutions.com Telephone Number: +49 30 66861555 Fax: +49 30 66861426 Mon - Fri 08:00 am to 06:00 pm (CET) Parts Identification and Ordering Request for help in identification of non-referenced spare parts should be directed to the Customer Care Organization of Motorola’s local area representation.
MTM5400 Mobile Terminal Installation Manual SCOPE Asia, Pacific Region Piece Parts Some replacement parts, spare parts, and/or product information can be ordered directly. If a complete Motorola part number is assigned to the part, it is available from Motorola Radio Aftermarket and Accessory Division (AAD). If no part number is assigned, the part is not normally available from Motorola.
SCOPE MTM5400 Mobile Terminal Installation Manual Latin America Region Latin America Radio Support Centres The Customer Support is available through the following service centres: Warranty and Repairs: MOTOROLA DE COLOMBIA SERVICE CENTRE Torre Banco Ganadero Carrera 7 No. 71-52 Torre B piso 13 Oficina 1301 Bogota - Colombia (571) 376-6990 MOTOROLA DE MEXICO SERVICE CENTRE Bosques de Alisos #125 Col.
MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK
MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual 21 MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Model Information This manual applies to the following Mobile Terminal Models Type No. Sales Model No.
MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES Model Specifications* GENERAL ETSI: RECEIVER ETS 300 394-1 ETS 300 489-1 Type Number: MTM5400 380-430 MHz Power Supply: Minimum: Nominal: Maximum: Max.
MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual 23 Accessories-to-Model Chart ACCESSORIES Control Heads Part Number M1 M2 M3 M4 Control Head, Roman Keypad PMWN4009 X X Control Head, Arabic Keypad PMWN4012 X X Control Head, Cyrillic Keypad PMWN4014 X X Control Head Hungarian Keypad PMWN4015 X X Control Head Hebrew Keypad PMWN4016 X X Remote Mount Control Head, Roman Keypad PMWN4017 X Remote Mount Control Head, Arabic Keypad PMWN4020 X Remote Moun
MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES ACCESSORIES Desktop Tray without Loudspeaker GLN7318 X Desktop Tray with Loudspeaker RSN4005A X Desktop Power Supply HPN4007C X X Desktop Power Supply GPN6145B X X Power Cable (For Desktop Power Supply HPN4007C) Part Number M1 M2 M3 M4 M5 US Linecord (3060665A04) Packed NTN7373 X X Euro Linecord (3060665A05) Packed NTN7374 X X UK Linecord (3002120F02) Packed NTN7375 X X Power Cable, for use wit
MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual 25 ACCESSORIES DIN Mount Bracket PMLN5093 Programming/Data Part Number X M1 M2 M3 M4 M5 USB Programming Cable (Terminal Rear Port) PMKN4110 X X X X Programming Cable PMKN4105 X X X X Active Data Cable4 PMKN4104 X X4 X X USB Programming Cable (Mobile Microphone Port) HKN6184 X X X X Part Number M1 M2 M3 M4 M5 Antenna Whip Tetra Hinged 380 – 430MHz GMAE4253A X X X X X Antenna Tetra Glass
MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES this can be achieved by installing (P/N: 01015001001) as shown in kit leaflet. The specific configuration can be tested using the following technique: The test requires a second radio in a quiet place or cooperation with a dispatcher. 1. Ensure that all other electrical and electronic equipment in the vehicle that may cause interference is not active. 2.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 27 INSTALLATION Introduction General Information This product must be installed in a vehicle in accordance with the vehicle manufacturer’s guidelines and the instruction detailed in this manual. Only the specified Motorola parts in this manual should be used. Failure to do so could result in non compliance to the Automotive Directive (72/245/EEC, as amended by 95/54/EC).
MTM5400 Mobile Terminal Installation Manual INSTALLATION In a vehicle with an airbag, make sure that the mounting location of the mobile terminal, or of any terminal accessory, is not in the deployment path of the air bag. Uninstaling the radio OPTION 1: Before disconnecting the 13.2 V main power supply from the radio: 1. Switch off the radio. 2. Wait for a minimum of 4 seconds after the radio switch is released. 3. Disconnect the 13.2 V main power supply.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 29 In cases of blown fuses, replace ONLY with those of identical value. NEVER insert ones of different values. Installation Procedure Begin the DC power cable installation as follows: 1. Determine a routing plan, keeping in mind where the terminal is to be mounted and make sure that the cable does not rest on sharp edges. Improper handling with the power cable may cause shorting to ground.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Fuse (10 A) Fuse Holder Adapter Cover Red Lead Red Lead (min. 2.5 mm2) Red Lead (min. 2.5 mm2) Mounting Hole Ring Lugs Black Lead (min. 2.5 mm2) To Battery or Chassis To Battery + Figure 2 Power Cable Assembly 5. Place the fuse holder close to the battery. Ensure that it is not near any hot engine component. Mount the fuse holder using its mounting hole and dress the wires as required. 6.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 31 Terminal Installation Enhanced Control Head Installation The Enhanced Control Head can be removed from the housing and turned to any position within a 180° radius. This provides multiple mounting options for the terminal. For example, the terminal may be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal position. The Enhanced Control Head may then be turned to provide the most convenient access.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Trunnion Installation Installation Planning The trunnion allows the terminal to be mounted to a variety of surfaces. 1. The trunnion must be securely fixed to the vehicle chassis. 2. Ensure the surface can support the weight of the terminal. 3. Although the trunnion can be mounted to a plastic dashboard, it is recommended that the mounting screws be located so they penetrate the supporting metal frame of the dashboard. 4.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 33 Installation Procedure 1. Select either the transmission hump or an open underneath portion of the dash to mount your terminal (see Figure 6). When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected. 2. Use the trunnion mounting bracket as a template, to mark the hole positions on the mounting surface.
MTM5400 Mobile Terminal Installation Manual INSTALLATION TRANSMISSION HUMP MOUNTING Wing Screw (2) Tab Tab Mounting Surface Trunnion Mounting Bracket Tab 28 mm (1.12") 46 mm (1.84") 73 mm (2.92") 46 mm (1.84") 73 mm (2.92") BELOW DASH MOUNTING Mounting Surface Sheet Metal Screws Wing Screw (2) Figure 6 Transmission Hump Mounting (Top) and Below Dash Mounting (Bottom) Dashboard Installation Installing the Radio in an Automotive Dashboard 1. Open out the radio cut-out in the dashboard. 2.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 35 tabs, using all 6 where possible, to hold it in place. The tabs are easily bent back by twisting a large flatbladed screwdriver into the slot behind the tabs. For a more secure installation the top and rear of the frame should also be secured with screws. The demount tool can be used as an aid to mounting as well as demounting. 4. Ground the mouting frame to the nearest vehicle chassis ground point. Mounting the Radio in the Frame 1.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Table 2 DIN Mount Kit Components Item 1 Description Part Number DIN Mount Kit PMLN5094 Demount Tool 8166514A01
INSTALLATION MTM5400 Mobile Terminal Installation Manual Remove the Radio from the Frame 1. Remove both rubber side caps from the Enhanced Control Head. 2. Insert the demount tool into the two openings as shown in Figure 8 below. Figure 8 Removing the Radio from the Frame 3. Push the demount tools through the openings in the frame. 4. Slide out the radio.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Desktop Installation The MTM5400 may be desktop mounted. The Desktop Station option provides the terminal with the desk microphone, power supply, desk top tray (without speaker) and external loudspeaker. If an outdoor antenna is used a proper grounded Lightning Protector with Quarter-Wave Shorting Stub must be inserted between the outdoor antenna and the transceiver antenna input.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 39 Wall Outlet Line Cord with Ground Power Supply 12 V Desktop Power Cable Outdoor Antenna Lightning Protector with Quarter-Wave Shorting Stub Speaker Desk Microphone or CCCCCCCC CCCC CCCC CCCCCCC CCC Antenna Cable Indoor Antenna Antenna Connector BNC C CCCCC CCC CC CCC CCC CC CCC CC Radio in Desktop Tray Figure 9 Desktop Mounting (See Table 3 for Part Numbers) Table 3 Associated Components Item Description Part Number 1 Deskto
MTM5400 Mobile Terminal Installation Manual INSTALLATION Remote Mount Installation Remote Mount Cable Transceiver 10-Pin Connector 10-Pin Connector Remote Head Enhanced or Data Expansion Head Enhanced Remote Mount Enhanced Control Head Figure 10 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced Table 4 Associated Components for Remote Mount Item Description Part Number 1 Remote Mount Cable, 3 m RKN4077 2 Remote Mount Cable, 5 m RKN4078 3 Remote Mount Cabl
INSTALLATION MTM5400 Mobile Terminal Installation Manual 41 Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion 1. Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps into place. 2. Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an optimum view of the display. Then, complete the tightening of the screws. 1 1 1 mm -0.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket 1. Slide the Remote Mount Enhanced Control Head onto the DIN Mount Bracket until it snaps into place. 2. Tighten the screws at both sides of the DIN Mount Bracket. 5 .1 -0 / 5+ 15 2 m m 1 76.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 43 Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame 1. Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place. The tabs are easily bent back by twisting a large flatbladed screwdriver into the slot behind the tabs.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Adding Extra Connectivity to the Remote Head The Accessories Expansion Cable (PMKN4029) allows users to have extra connectivity to accessories via the Mobile Microphone Port (MMP) and USB port. Accessories Expansion Cable (PMKN4029) Mobile Microphone Port/USB Port Module Figure 14 The Accessories Expansion Cable with the Mobile Microphone Port (MMP)/USB Port Module Installing the Accessories Expansion Cable 1.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 45 Motorcycle Mount Enhanced Control Head Installation Be advised, the motorcycle installation is not applicable to 260–275 MHz terminals. Figure 15 Motorcycle Mount Enhanced Control Head - Front Side The keypad labelling of the control head may vary according to the specific customer/country concerns. Planning Planning is the key to fast, easy radio installation.
MTM5400 Mobile Terminal Installation Manual INSTALLATION 8. Verify that the antenna cable is routed in the shortest way to minimize power loss over the cable. 9. Check that the mounting surfaces are able to support the weight of the units. If an additional GPS antenna or a combined TETRA/GPS antenna is used, the antenna housing carries the GPS receiver. Take care not to cover the antenna housing with metal or other radio wave absorbing material.
INSTALLATION MTM5400 Mobile Terminal Installation Manual Figure 17 Upward Movement Figure 18 Downward Movement 47
MTM5400 Mobile Terminal Installation Manual INSTALLATION Mechanical Parts 1 2 2 .1 m +/-0 5 5 1 33 mm m 3 Figure 19 Motorcycle Mount Enhanced Control Head Mounted in a Trunnion Table 7 Motorcycle Mount Enhanced Control Head - Mechanical Parts List for Installation Item Description Part Number 1 Motorcycle Mount TELCO Cable PMKN4030 2&3 Motorcycle Trunnion Kit PMLN5092 Installation of the Motorcycle Mount TELCO Cable (PMKN4030) 1.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 49 Data Expansion Head Enhanced Installation Data Expansion Head Enhanced Radio without Control Head The Data Expansion Head Enhanced can be used without a control head. This configuration allows the use of the radio without any control head, allowing the radio to be powered on via the ignition switch. The packet data/SDS via the AT commands are available from the 9-pin subD connector (PEI).
MTM5400 Mobile Terminal Installation Manual INSTALLATION Data Expansion Head Enhanced with 3rd Party Control Head The Data Expansion Head Enhanced can be used with a “virtual head” on a PC or a third party control head. This configuration allows the controlling of the radio (Transceiver Box) with a Control Terminal (for example: Personal Computer, Laptop, Console, and so forth). In this configuration, the Control Terminal is a substitute for the Enhanced Control Head.
INSTALLATION MTM5400 Mobile Terminal Installation Manual Data Box Radio This configuration allows the controlling of the radio (Transceiver Box) via PEI (for example: Personal Computer, Laptop, Console, and so forth) with AT Commands (recommended) or TNP1 protocol from a Control Terminal. In this configuration, the Data Terminal is a substitute for the Enhanced Control Head.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Junction Box Installation Speaker to Terminal Accessory Connector External PTT Connecting cable PMKN4103 - 2m PMKN4102 - 4m PMKN4101 - 6m To Ignition switch F2 4A External alarm Emergency switch Fist Microphone GMMN4063 Junction Box GMNL5089 Accessory Connector Kit HLN9457 Standard RS232 cable Laptop Figure 22 Remote Mount Installation with Junction Box General The junction box (GMLN5089) assists the easy installation for dash and rem
INSTALLATION MTM5400 Mobile Terminal Installation Manual 53 Service The junction box PCB is not repairable. Please order a new junction box as necessary. Connections 1. Connect all accessories to the junction box. If it is required please see “Re-crimp Procedure” on page 61to be able to connect your accessory. 2. Connect the mobile-terminal-to-Junction box cable to the junction box. 3. Connect the programming cable to the junction box (if required).
MTM5400 Mobile Terminal Installation Manual INSTALLATION 4 = Connector for programming cable FLN 9636 This is a legacy connector which currently is not supported. For programming the transciever, use PMKN4105A programming cable that is connected directly to the transciever.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 55 Connection Plan for the Alarm Relay BUZZER BLK 5 RED +12V ALTERNATIVE 1 2 3 4 External alarm 5 6 5 BLK 7 +12 V JUNCTION BOX TERMINAL ALTERNATIVE 5 +12 V RED 86 87 85 30 RED RED ALARM RELAY RED BLK +12 V +12 V BLK 86 87 85 30 ALARM RELAY +12 V BLK Connection Plan for the Emergency Switch 1 2 3 4 5 6 EMERGENCY SWITCH 7 JUNCTION BOX TERMINAL To install the cable, carry out the following steps. 1.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Connection Plan for External PTT 7 version a) 3 1 2 3 4 5 3 6 version b) 7 JUNCTION BOX TERMINAL Connection Plan for Accessory Connector Kit (HLN9457) Part Number/Description Cable Connectivity RSN4002A Speaker 13W GMSN4078 Speaker 5W SPKR- 9 SPKR+ 10 RLN4857 Push button PTT RLN4858 Gooseneck PTT These accessories can be used for PTT or Emergency function.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 57 Radios with Data Expansion Head Enhanced To use a junction box with one of the MTM5400 mobile terminals fitted with a Data Expansion Head Enhanced, always use the 9-pin RS232 port on the Data Expansion Head Enhanced for PEI instead of the 9-pin RS232 port on the junction box (connector 6). Ensure to fit a jumper between pins 6 and 15 of the Junction Box (connector 5) for the PEI to operate correctly in this configuration.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Connectors and Pin Assignment of the Radio Transceiver Rear Side - Pin Function Accessory Connector 2 26 1 25 *Note the location of Pin 1 Figure 25 Location of Accessory Connector - Rear Side This section gives a description of the Accessory Connector pin functions. The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 59 Table 9 26-Pin Accessory Connector Pin Function Description 14 RX_AUDIO RX audio output 15 MIC2 MIC2 for noise cancelling dual mic input 16 GND_MIC Ground (for MIC) 17 EXTERNAL_PTT PTT input (pulled via 4K7 to 5V) 18 UART2_DTR / USBy_ID RS232 or UART1 / UART2 DTR / 2nd USB2.0 (OTG) ID 19 HOOK_PA_EN HOOK_PA_EN input (or programmable 5V GPIO) 20 UART2_TXD / USBy_TX RS232 or UART2 TXD / 2nd USB2.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Accessory Connection Plan The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information. Ensure correct position of the accessory connector.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 61 Re-crimp Procedure In order to use accessories (RLN4858 and GKN6272) with the rear connector of the radio, please follow the re-crimp procedure using the crimp pins provided with PMLN5072 connector kit. These accessories do not require to be re-crimped when used with the Junction Box GMLN5089. 1. Cut and remove nickel plated pins from wire. 2. Strip the insulation from the end of the wires (2mm to 4mm). 3.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Connectors and Pin Assignment of Data Expansion Head Enhanced and Remote Head Enhanced Front View CAUTION: NOT a Microphone Connector 1 2 3 4 5 6 7 8 9 10 1 13 25 14 J302 10-Pin TELCO Connector 25-Pin subD Connector 1 5 9 6 9-Pin subD Connector Figure 26 Data Expansion Head Enhanced - Front View and Connector Location Front View CAUTION: NOT a Microphone Connector 10-Pin TELCO Connector J302 10 9 8 7 6 5 4 3 2 1 Figure 2
INSTALLATION MTM5400 Mobile Terminal Installation Manual 63 Table 10 10-Pin TELCO Connector Pin Function Description 1 Audio + Balanced Audio + (Bidirectional) 2 Not Connected 3 BUS+ This is used for communication between the radio and an Enhanced Control Head. 4 Audio- Balanced Audio - (Bidirectional) 5 Not Connected 6 Ground Ground 7 Radio On/Off Control This is the Enhanced Control Head service request input.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Table 11 25-Pin subD Connector Pin 14 Function Description ON_OFF_CONTROL / FLASH_MODE 15 16 • • Switch into flash mode (connect pin14 with 6) On/Off control for Std.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 65 Connector and Pin Assignment of the Enhanced Control Head Flex Cable o Pin 12 Front View of the Mobile Microphone Port (MMP) Connector 1 2 5 6 9 10 3 4 8 7 Figure 28 View of the Enhanced Control Head’s Mobile Microphone Port Connector and Flex Cable The keypad labelling of the control head may vary according to the specific customer/country concerns.
MTM5400 Mobile Terminal Installation Manual 1 INSTALLATION 10 10-Pin Telco Connector 1 13 25-Pi n Back Connector 25 14 Figure 29 View of the Enhanced Control Head’s rear connectors Table 14 10-Pin Telco Connector Telco Connector Pin Function Description 1 AUDIO + Balanced Audio + (Bidirectional) 2 NC Not Connected 3 BUS + This is used for communication between the radio and an Enhanced Control Head.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 67 Table 15 25-Pin Back Connector Back Connector Pin Function Description Default 1 GPIO_9 GPIO Output: Active for duration of call (car radio mute) 2 GPIO_6 GPIO PTT Input, TX audio from MIC_REAR_2 3 GPIO_8 GPIO Disabled 4 GPIO_3 GCAI PIN 2 PTT Input, TX audio from MIC_REAR_1 5 VBUS_1B GCAI PIN 6: 5V Supply Disabled 6 REAR_D - GCAI PIN 4: USB D -, GPIO_2 (Shared with the front MMP) Disabled 7 REAR_D + GCAI PIN 8: USB
MTM5400 Mobile Terminal Installation Manual INSTALLATION Connecting Cables Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable) Part Number: PMKN4030 Length: 2.3 m (7.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 69 Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable) Part Number: PMKN4029 Mobile Microphone Port subD Connector USB Connector Figure 31 Connecting Cable - Accessories Expansion Cable Table 16 Accessories Expansion Cable, Connector Pin Function USB A JACK 1 2 3 4 Signal subD 25 Pos VBUS DD+ Ground 9 22 21 18 1_WIRE GPIO_3 / OTG-ID / RTSc (PTT) Speaker to Headset GPIO_2 /
MTM5400 Mobile Terminal Installation Manual USB A JACK BROWN / WHITE RED / WHITE ORANGE / WHITE RED / BLACK YELLOW / WHITE Signal RTS CTS Power On Headset Ground INSTALLATION subD 25 Pos 23 24 25 17 -
INSTALLATION MTM5400 Mobile Terminal Installation Manual 71 Radio-to-Junction Box Part Number: PMKN4101 Length: 6 m (19.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Data Expansion Head Enhanced Radio-to-Data Device This is a standardized RS232 cable (will not be provided by Motorola). Use the 9-pin socket on the front side of the Data Expansion Head Enhanced Radio to connect this cable with the data device. Figure 33 Standardized RS232 Cable The Data Expansion Head Enhanced has a protection grade of IP54.
INSTALLATION MTM5400 Mobile Terminal Installation Manual 73 Data Expansion Head Enhanced Radio-to-Fist Microphone The GMKN4072 Connecting Cable replaces the existing coiled cord cable of the fist microphone (Motorola P/N: GMMN4063). The GMKN4072 originally is terminated with a 20-pin connector. Use the PMLN5072 accessory connector kit to recrimp it.
MTM5400 Mobile Terminal Installation Manual INSTALLATION to Accessory Connector to Microphone Housing 1 ... 11 12 13 14 15 16 17 18 19 20 ... 26 nc ... nc GND (black) EXT_MIC (blue) nc nc nc EXT_PTT (white) nc HOOK (red) nc ...
INSTALLATION MTM5400 Mobile Terminal Installation Manual 75 Radio-to-Data Device: Active Data Cable The PMKN4104 Active Data Cable provides a 5-wire RS232 interface (for example, RxD, TxD, CTS, RTS, DTR) between a computer and a mobile radio. The cable has to be connected to the 26-pin Accessory Connector on the rear side of the radio and into the 9-pin connector of a Data Device (for example, PC, Laptop, console). The PMKN4104 Active Data Cable is not repairable. Order a replacement cable as necessary.
MTM5400 Mobile Terminal Installation Manual INSTALLATION Vehicle Antenna Installation Mobile Radio Operation and EME Exposure To assure optimal radio performance and that human exposure to radio frequency electromagnetic energy is within the guidelines referenced in this document, transmit only when people inside and outside the vehicle are at least the minimum distance away from a properly installed, externallymounted antenna.
INSTALLATION 6. MTM5400 Mobile Terminal Installation Manual 77 Any two metal pieces rubbing against each other (such as seat springs, shift levers, trunk and hood lids, exhaust pipes, and so forth) in close proximity to the antenna can cause severe receiver interference. The MTM5400 mobile terminal has the option of a GPS board.
MTM5400 Mobile Terminal Installation Manual INSTALLATION External Speaker Installation 1. Remove the speaker from the trunnion bracket by loosening the two wing screws. 2. Choose a place to mount the speaker. When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected. 3. Use the trunnion bracket as a template to mark the positions of the mounting holes. 4.
PRODUCT SPECIFIC INFORMATION MTM5400 Mobile Terminal Installation Manual 79 APPENDIX Product Specific Information for Digital Terminals Type MT953C This section gives the Service Personnel an overview about product specific notes. This is necessary to take special precautions to avoid the introduction of hazards when operating, installing, servicing or storing equipment. This terminal meets the applicable safety standards if it is used as described.
MTM5400 Mobile Terminal Installation Manual PRODUCT SPECIFIC INFORMATION Fuse Identification In case of blown fuses during the installation replace ONLY with those of identical value. Never insert ones of different values.
