User`s guide

CPU32 Emulation 97
Chapter 6: Using Internal Registers (SIM and EMSIM Registers)
Saving and Loading EMSIM Values
Saving and Loading EMSIM Values
You can use the Emulation Control Interface to save the EMSIM values
to a configuration file then to restore the EMSIM values.
To save EMSIM values in a configuration file
1
Open the Workspace window and select
File
➞
Save
Configuration...
.
2
Set the
Source
field to the emulator (for example,
Motorola
CPU16/32 BDM Emulator (Slot 1)
).
3
Select a file name and click
Save
.
To load EMSIM values from a configuration file
Once you have saved the configuration, you can specify the saved
configuration file and have your EMSIMs set up to the proper values.
1
Open the Workspace window and select
File
➞
Load
Configuration...
.
2
Set the
Source
field to the emulator (for example,
Motorola
CPU16/32 BDM Emulator (Slot 1)
).
The configuration file contains more than just the EMSIM values.
When you load the configuration, the whole emulator configuration will be
restored, including all configuration settings, and the locations of windows.
Intermodule measurement configurations will be lost (unless you save and
restore with the Source set to
All
).