User`s guide

92 CPU32 Emulation
Chapter 6: Using Internal Registers (SIM and EMSIM Registers)
Configuring the SIM Registers
Based on the previous discussion, it should be clear that the EMSIM
values specified during configuration need to match the intended
programming and of use of your CPU32 target system. You need to
carefully decide how the processor will be configured and the
corresponding SIM values.
The effect of processor type on the EMSIM
registers
EMSIM registers are valid only if the emulator has been configured
with a target processor name other than 683xx. If the processor is
683xx, the emulator does not know what type of SIM exists in the
target and will not display correct values for the SIM registers.
Using the Emulation Control Interface or built-in
commands
If you are using the logic analysis system’s Emulation Control Interface,
you should use the Emulation Control Interface to work with SIM and
EMSIM registers.
If you are using a debugger, use a telnet window or your debugger’s
“emulator command” window to enter the emulator’s built-in
commands.
See Also
See “Emulator Built-in Commands” on page 165 for more information
on how to use built-in commands.