User`s guide

CPU32 Emulation 77
Chapter 5: Connecting and Configuring the Emulator
Configuring the Emulator
See Also
Help➞Help on this window in the Configuration window for
information on each of the configuration options.
Help in the Emulation Control Interface menu for help on starting an
Emulation Control session.
To configure using the built-in commands
If you are unable to configure the emulator with the Emulation Control
Interface or a debugger interface, you can configure the emulator using
the built-in “terminal interface” commands.
1
Connect a telnet session to the emulator over the LAN.
For example, on a UNIX system, for an emulation module in Slot 1
enter:
telnet LAN_address 6472
2
Enter
cf
to see the current configuration settings.
3
Use the
cf
command to change the configuration settings.
See Also
Enter help cf for help on the configuration commands.
For information on connecting using telnet, and for information on
other built-in commands, see page 165.