User`s guide

56 CPU32 Emulation
Chapter 4: Installing Software on an HP16600A/700A
Installing Software on an HP 16600A/700A
To install the software from CD-ROM
(HP 16600A/700A)
Installing a processor support package from a CD-ROM will take just a
few minutes. If the processor support package requires an update to
the HP 16600A/700A operating system, installation may take
approximately 15 minutes.
If the CD-ROM drive is not connected, see the instructions printed on
the CD-ROM package.
1
Turn on the CD-ROM drive first and then turn on the logic
analysis system.
2
Insert the CD-ROM in the drive.
3
Click the
System Admin
icon.
4
Click
Install...
.
Change the media type to “CD-ROM” if necessary.
5
Click
Apply
.
6
From the list of types of packages, select “PROC-SUPPORT.”
A list of the available processor support packages will be displayed.
7
Click on the “M683XX” package.
If you are unsure if this is the correct package, click Details for
information on what the package contains.
8
Click
Install...
.
The dialog box will display “Progress: completed successfully” when
the installation is complete.
9
Click
Close
.
The configuration files are stored in /hplogic/configs/hp/processor.
The inverse assemblers are stored in /hplogic/ia.